Prosep UV-PRO 2
A pre-built & tested system for domestic use, easily installed by user.
Only necessary to make a connection to the water supply in and out.
All units are mounted onto a marine ply backing board with a waterproof facing. They are ready to fix directly onto a wall.
Power provided by simply plugging into standard 13 amp socket.
Automatic shutdown in the event of UV lamp failure.
Automatic shutdown in the event of power failure.
Features an alarm, alerting user of failed UV light.
Only water that has been treated passes to the taps
Flow rate = 30 litres/minute.
(For 20 litres/minute see the Prosep UV-Pro1; for 40 litres/minute see the Prosep UV-Pro3.)
Kills bacteria and filters the water supply. One household/property only – up to 4 people.
This system has the added benefit of a control system, that will automatically shut off the water supply, should either the lamp or the power fail. This gives the user a very clear indication that there has been a problem. No untreated water will pass through the taps once the system has being shut off.
All units are mounted onto a marine ply backing board, with a waterproof facing, which means they are ready to fix directly onto a wall.
The system is pre-prepared to allow quick installation.
Features and Benefits
- Stainless steel 10 bar rated chamber
- Hours countdown
- Lamp running hours
- Lamp fail alarm
- End of lamp life alarm
- Automatic shutdown on lamp failure
- Automatic shutdown on power failure
- Included pre-filter
- Only water that has been treated passes to the taps
Lamp Change: annually
Quartz Change: annually
Seal Kit Change: annually
Pre-filter Change: 6-monthly